logo

รายละเอียดสินค้า

Created with Pixso. บ้าน Created with Pixso. ผลิตภัณฑ์ Created with Pixso.
ไจโรมาตรความเร่ง IMU
Created with Pixso.

Real-Time Inertial Measurement Unit for Robotics and Automation

Real-Time Inertial Measurement Unit for Robotics and Automation

ชื่อแบรนด์: FIREPOWER
เลขรุ่น: IMU6-36
MOQ: 1
เงื่อนไขการจ่ายเงิน: แอล/C,ที/ที
ความสามารถในการจําหน่าย: 500/เดือน
ข้อมูลรายละเอียด
สถานที่กำเนิด:
จีน
ความไม่เสถียรของศูนย์อคติ:
≤3°/h
ช่วงการวัด:
480°/วินาที
เดินสุ่มมุม:
0.25°/√ ชม
ช่วงการวัด (มาตรความเร่ง):
กำหนดได้ 2 ~ 16g
การทำซ้ำแบบไม่มีอคติ:
≤5°/ชม
แบนด์วิธ:
≥ 100Hz
น้ำหนัก:
18g
แรงดันไฟฟ้า:
5 ± 0.3V
อินเทอร์เฟซ:
uart
ช่วงการวัด:
±480°/วินาที
การทำซ้ำอคติ:
≤5°/ชม
การมีเพศสัมพันธ์ข้าม:
≤0.1%
สเกลแฟกเตอร์ไม่เชิงเส้น:
≤50ppm
ระลอก:
100mV
รายละเอียดการบรรจุ:
ฟองน้ำ+กล่อง
สามารถในการผลิต:
500/เดือน
เน้น:

Real-Time IMU for robotics

,

Inertial Measurement Unit sensor

,

Gyro sensor for automation

คำอธิบายผลิตภัณฑ์
Real-Time Inertial Measurement Unit for Robotics and Automation
The IMU6-36 Inertial Measurement Unit delivers precise measurements of three-axis angular rates and accelerations. This rugged unit integrates a 3-axis gyroscope, 3-axis accelerometer, temperature sensor, and signal processing board, outputting data with advanced error compensations including temperature and installation misalignment angle corrections. Designed for applications requiring high stability and reliability in aerospace, automotive, and robotics industries.
Gyroscope Technical Specifications
Parameter Unit Test Conditions IMU6-36
Measuring range °/s Configurable ±480
Zero-bias instability °/h Allan variance ≤3
Zero bias stability °/h 10s smooth, RMS, normal temperature ≤8
Zero bias variation at full temperature °/h 10 s smoothing, three-temperature zero-bias variation (-45 ℃, 25 ℃, 85 ℃) ≤150
Random walk °/√h Allan variance ≤0.25
Zero-bias repeatability °/h Q = 6, normal temperature ≤5
Scale factor nonlinearity ppm Normal temperature ≤50
Cross coupling % Normal temperature ≤0.1
Bandwidth Hz Configurable ≥100
Accelerometer Technical Specifications
Parameter Unit Test Conditions IMU6-36
Measuring range g Configurable 2 ~ 16g ±16
Zero bias stability mg 10s smooth, RMS, normal temperature ≤0.1
Zero bias variation at full temperature mg 10 s smoothing, three-temperature zero-bias variation (-45 ℃, 25 ℃, 85 ℃) ≤2.5
Zero-bias repeatability mg Q = 6, normal temperature ≤0.1
Scale factor nonlinearity ppm Normal temperature, ± 1 g ≤200
Cross coupling % Normal temperature ≤0.1
Bandwidth Hz Configurable ≥100
Power Supply Requirements
Parameter Unit IMU6-36
Voltage V 5±0.3
Starting current mA 100
Steady-state power consumption W ≤0.25
Ripple mV 100
Environmental Adaptability
Parameter Unit IMU6-36
Operating temperature -45~85
Storage temperature -55~105
Additional Specifications
Parameter Unit IMU6-36
Weight g 18±1
Start time s ≤2
Outline Drawing
Real-Time Inertial Measurement Unit for Robotics and Automation 0